The spring pre-load setting can be checked by counting the number of grooves visible below the adjuster bolt see illustration see Chapter 6. Rebound damping and compression damping require the adjusters to be screwed fully in to check the correct setting and then screwed out to reset as required see Chapter 6. The radiator cap opening pressure should be checked by a Yamaha dealer with the special tester required for the job.
If the cap is defective, replace it with a new one. Unscrew the reservoir mounting bolts and lift the reservoir off the motorcycle, carefully threading the breather hose attached to the filler neck out of its guides see illustration.
Tip the coolant out of the reservoir into a suitable container. Item Description. Remove the reservoir cap and pull out the radiator overflow hose see illustration. The 'Ask a Question' function requires JavaScript.
Don't have yet but when I finish will tell all about tanks Was this rating helpful to you? Click here to review this product Reviews are subject to approval. About Us. Any reproduction or unauthorized use without the written permission of Yamaha Motor Co. Page 4: Important Information It is not possible to include all the knowledge of a mechanic in one manu- al, so it is assumed that anyone who uses this book to perform maintenance and repairs on Yamaha motorcycles has a basic understanding of the mechanical ideas and the procedures of motorcycles repair.
Comprehensive explanations of all installation, removal, disassembly, assembly, repair and inspection procedures are laid out with the individual steps in sequential order. INFO Symbols 1 to 9 indicate the subject of each chapter. O Fasten the main harness, ground lead and battery Mount the cable so that the side covered with a box with a plastic clamp.
P The end of the clamp is facing upward. Page Periodic Checks And Adjustments S The annual checks must be performed every year, except if a kilometer-based maintenance is performed instead. S From 50, km, repeat the maintenance intervals starting from 10, km. S Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
Sidestand S Lubricate. S Check operation. Sidestand switch S Check operation and for oil leakage. Front fork Rear shock absorber S Check operation and shock absorber for oil leakage. Stand the motorcycle on a level surface. S Make sure that the motorcycle is upright. Check: S brake fluid level Below the minimum level mark a! Add the recommended brake fluid to the proper lev- Recommended brake fluid Measure: S tire pressure Out of specification!
The front and rear tires should always be by the same manufacturer and of the same design. No guarantee con
0コメント